SMA AUTOMATIC SWITCH BOX M - Manual (Page 32)

Electrical Connection SMA Solar Technology AG
32 AS-BoxM-IEN091711 Installation Guide
Connection Procedure
1. Select suitable opening for the cable of the generator and poke a hole in it with a pointy device.
The cable has to be tightly enclosed by the cable gland after insertion.
2. Pull the cable of the generator through the opening into the Automatic Switch Box.
3. Connect PE to the "Generator" connection terminal according to the label.
4. Connect L to "L1" of the "F6 Generator" fuse element.
Torque: 4 Nm +/– 20 %
5. Connect N to the "Generator" connection terminal according to the label.
☑ The generator is now connected.