SMA AUTOMATIC SWITCH BOX M - Manual (Page 23)

SMA Solar Technology AG Electrical Connection
Installation Guide AS-BoxM-IEN091711 23
Connection Procedure
1. Select the suitable opening for the feed-in counter cable and poke a hole in it with a pointy
device.
The cable has to be tightly enclosed by the cable gland after insertion.
2. Pull the cable of the feed-in counter through the opening into the Automatic Switch Box.
3. Connect PE to the "X5/PV Meter" connection terminal according to the label.
4. Connect L1 and N to the "X5/PV Meter" connection terminal according to the label.
☑ The feed-in meter is now connected to the Automatic Switch Box.