SMA BEAM-BT-10 - Manual (Page 26)

Commissioning SMA Solar Technology AG
26 BeamBT-BEN094911 User Manual
30. Set the NetID on all inverters and available SMA Bluetooth Repeaters, as described in the
respective manual.
31. Commission all devices of your Bluetooth PV system as described in the respective manual.
Search for your own Bluetooth PV system
Do not start the Sunny Beam again until you have set the free NetID on the inverters and available
SMA Bluetooth Repeaters and have commissioned these devices.
32. Set up the Sunny Beam at its intended installation site.
33. To search for your Bluetooth PV systems, choose "Repeat search".
You can also start the system search via the menu "Settings > PV plant > New plant search".
☑ The system search will begin.
☑ The Sunny Beam detects all Bluetooth PV systems
within range and lists the NetIDs of the detected
Bluetooth PV systems.
– If the Sunny Beam does not list the NetID of your
Bluetooth system, please refer to section If the Sunny
Beam does not list the NetID of your Bluetooth PV
system, please refer to section 12 "Troubleshooting"
(page 77).