SMA BEAM-BT-10 - Manual (Page 15)

SMA Solar Technology AG Installation Location
User Manual BeamBT-BEN094911 15
5 Installation Location
5.1 Installation Location Requirements
• Sunny Beam is only suitable for indoor use.
• The ambient temperature must be between 0 °C and +40 °C.
• The indoor location must have access to sunlight in order for the integrated solar cells of the
Sunny Beam to be able to recharge themselves.
• Protect the Sunny Beam from dust, wet conditions and caustic substances.
• The maximum total length of the USB connection cable is 3 m.
• Certain ambient conditions can reduce the connection quality and data transmission speed
between Bluetooth devices.
– Install the Bluetooth device at a distance of at least 1 m from the following devices:
– WLAN devices
– Microwave ovens
– Other devices that use the 2.4 GHz frequency band.
5.2 Installing the Sunny Beam
As long as the requirements for the location are observed (see section 5.1 ), the Sunny Beam can be
installed at any indoor location. Whether the installation location is suitable for a good connection
quality can be found out after during commissioning of the Sunny Beam.