SMA BATFUSE-B.01 - Manual (Page 11)

SMA Solar Technology AG 5 Transport and Mounting
Operating Manual BatFuse-BE-en-30 11
5 Transport and Mounting
5.1 Transport
There are no special requirements for transport. The BatFuse can be transported without any aids.
5.2 Mounting the BatFuse
Requirements for the mounting location:
☐ The BatFuse must be mounted on a stable support surface, e.g. concrete, walls.
☐ The mounting location must be suitable for the weight and dimensions of the BatFuse
(see Section 10 "Technical Data", page 21).
☐ The mounting location must be clear and safely accessible at all times without the need for any
auxiliary equipment (e.g. scaffolding or lifting platforms).
☐ The mounting location must not hinder access to disconnection devices.
☐ Above and below the BatFuse, a clearance of 300 mm to walls, other devices or objects must
be maintained.
☐ The mounting wall must be vertical.
☐ The climatic conditions must be met to ensure proper operation (see Section 10.8 "Ambient
Conditions", page 22).
Dimensions for wall mounting:
Figure 3: Dimensions of the drill holes