SMA CBL-DC-CMB1-10 - Manual (Page 10)

CBL-DC-CMB1-10
10 PHOENIX CONTACT 106183_en_00
4 Checking the delivery
4.1 Packaging
The contents of the packaging must be checked for completeness immediately upon deliv-
ery using the delivery note and/or parts list. The packaging of the CBL-DC-CMB1-10 must
not show any signs of external damage caused by transportation. Damaged packaging is
an indicator of potential damage to the CBL-DC-CMB1-10 that may have occurred during
transportation. This may cause the CBL-DC-CMB1-10 to malfunction.
Check the delivery for transport damage. Report any transport damage immediately.
– Keep the box and packaging material for checking purposes.
– Inform the manufacturer and/or your supplier immediately.
– Inform the transport company immediately.
4.2 Packaging when returning equipment
When returning the equipment, always use the original packaging. If the original packaging
is no longer available, it is essential to observe the following points. Most of the transport
damage that occurs during goods transportation is caused by incorrect handling of the
packaging.
– Please observe the humidity specifications and the temperature range specified for
storage/transport.
– If necessary, use dehumidifying agents.
– Protect electrostatically sensitive components and secure loose parts.
– Make sure that the packaging you select is large enough and sufficiently thick.
– Only use plastic bubble wrap sheets as wadding.
– Make sure that the goods cannot make contact with the outer walls of the cardboard
packaging.
– Attach warnings to the transport packaging so that they are clearly visible.
– Observe the rupture load classes. This means that the least sensitive parts must be
placed at the bottom.
– Please be aware that the delivery note is to be placed inside the package in the case of
packages that are to remain within the same country. However, if the package is being
sent abroad, the delivery note must be placed inside a delivery note pocket and at-
tached to the outside so that it is clearly visible.
– Stretch and strap bulky goods.