Eagle Electronics SeaFinder 250 DF User Manual

Page 55

over the face of the transducer and even vibration from the engine. In

all cases, noise can produce unwanted marks on the display.

Noise Rejection menu.

The ASP noise rejection feature is especially useful because, typically,

it lets you operate the boat at all speeds without adjusting the sensi-

tivity or other controls.
The ASP feature has three settings — Off, Low and High. When first

turned on, noise rejection is set on low. If you have high noise levels,

try using the high ASP setting. If, however, you are having trouble

with noise, we suggest you take steps to find the interference source

and fix it, rather than continually using the unit with the high ASP

setting. There are times when you may want to turn off ASP. This al-

lows you to view all incoming echoes before they are processed by the

ASP feature.
To change the ASP setting, repeatedly press

MENU

until the

OISE

EJECTION

menu appears. Use

↑ ↓

to select the desired setting, then press

PWR

to clear the menu.