Eagle Electronics SeaFinder 250 DF - Manual (Page 42)

38
To do this, make sure Depth Range is set to manual mode. Next, re-
peatedly press
MENU
until the
Z
OOM
menu appears. Press ↓ to select
2X
or
4X
, then press
MENU UP
to display the
Z
OOM
R
ANGE
menu.
Use ↑ ↓ to select a desired zoom range. When you are finished, press
PWR
to clear the menu from the display.
Zoom Range menu with the 40-80 foot zoom selected. Notice the win-
dow on the left zoomed 2X. The zoom range, 40-80 feet, covers a 40-foot
water segment. When zoomed in 2X, the zoom window will show 20 feet
of the water column with echoes magnified to twice their normal size.
You can select from these zoom ranges: 0-10, 7-14, 10-20, 15-30, 20-40,
30-60, 40-80, 50-100, 75-150, 100-200, 150-300, 200-400, 300-600, 400-
800, 500-1000, 750-1500, 1000-2000 and 1500-3000.
Sensitivity
Sensitivity adjusts the way echoes are displayed on the screen. If you
want to see more detail, try increasing the sensitivity, a little at a time.
When there is too much clutter on the screen, decrease sensitivity to
reduce the clutter and show the strongest fish echoes, if fish are pres-
ent. As you change the sensitivity setting, you can see the difference on
the chart as it scrolls.
Enlarged
fish
arches