Eagle Electronics SeaFinder 250 DF - Manual (Page 50)

46
Then, you can turn on Fish I.D. and the audible fish alarm. When that
lunker swims under your boat, you will hear it!
Fish I.D. can also be useful when you want to screen out some of the so-
nar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. on or off, repeatedly press
MENU
until the
F
ISH
ID
menu appears. Press ↓ to select
O
N
or
O
FF
, then press
PWR
to clear the
menu from the screen.
FishTrack™
The FishTrack  feature shows the depth of a fish symbol when it ap-
pears on the display. To turn it on, repeatedly press
MENU
until the
F
ISH
ID
menu appears. Press ↑ to select
T
RACK
O
N
, then press
PWR
. To turn it
off, repeat those steps, then press ↓ to select
O
FF
.
If you want to turn off FishTrack, but leave Fish I.D. on, press ↓ to se-
lect
O
N
, then press
PWR
. Remember, Fish I.D. must be on to use the
FishTrack feature.
Fish ID menu and symbol with FishTrack on. The fish is 44 feet deep.
Fish I.D. symbols
showing FishTrack
depth indicator