Eagle Electronics SeaFinder 250 DF - Manual (Page 51)

47
Alarms
Your sonar unit has four alarms: fish, shallow, deep and battery.
NOTE:
If one of the alarms goes off, press
PWR
to silence the alarm. It will
remain silent until it is triggered again.
Fish Alarm
The Fish Alarm sounds a tone when a fish symbol appears on the
screen. The Fish I.D. feature must be turned on for fish alarms to work.
To turn on Fish I.D., repeatedly press
MENU
until the
F
ISH
ID
menu ap-
pears. Press ↓ to select
O
N
, then press
MENU UP
and the
F
ISH
A
LARM
menu will appear. Press ↑ to select
O
N
and press
PWR
.
To turn off the fish alarm, repeatedly press
MENU
until the
F
ISH
A
LARM
menu appears. Press ↓ to select
O
FF
, then press
PWR
to clear the menu.
Fish Alarm menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shal-
low and a deep alarm. The shallow alarm sounds an alarm when your