ShoreLand'r SLKB150TA - Manual (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003957
Page 3 04/10/2008
Final Assembly Instructions
Remove the small parts from the frame by cutting the bands. Re-
move the bolt bag and sort all nuts and bolts by size.
Refer to the following individual pages for assembly instruction
by bundles.
Reference: Standing at the rear of the trailer will determine the
right and left side of the trailer in the assembly instructions.
The SL150T side frames and crossmembers are assembled at the
manufacturer. The spring brackets and fenders are also assembled
at the manufacturer.
Cautions and Warnings:
The law requires that the white ground wire on both the tongue wire
harness and vehicle harness be properly grounded to the respec-
tive trailer and vehicle frames.
Check all nuts and bolts; tighten before towing.
Tongue Weight Adjustment:
Tongue weight should be 5% to 7% of the total gross weight of the
boat and trailer combined.
Approximate Tongue Weight for Best Towing
Tongue weight too high, move the axle assembly forward.
Tongue weight too low, move the axle assembly backward.