ShoreLand'r 2x3 - Manual (Page 8)

Safety Chain:
Insert a 3/8” X 1-1/4” hex bolt with a 3/8” flat washer and
safety chain through the lower hole on the front of the
tongue. Secure with a 3/8” flat washer and 3/8” flange lock
nut. Repeat the procedure on the opposite side of the
tongue.
Coupler:
Mount the coupler onto the tongue with one (1) 1/2” X 4”
hex bolt into the rear of the couplerand tongue and using
two (2) 1/2” X 1” hex bolts into the two (2) front holes on
the coupler and tongue. Secure with 1/2” flange lock nuts.
Rear Pivot:
The rear pivot is adjustable. Place the rear pivot in one (1)
of the two (2) pre-drilled holes in the rear of the side
frames. Secure with 5/8” X 3-1/2” hex bolts, 5/8” flat
washers, nylon washer and 5/8” hex lock nut.
Roller Assembly:
Refer to Doc# 0002774 for assembly instructions.
Keel Roller:
Refer to Doc# 0002774 for assembly instructions.