ShoreLand'r 2x3 - Manual (Page 32)

2X3 Long Tongue W/Brakes Option (S-TL)
Actuator & Safety Chain:
Slide the actuator (Ref.#10) into the actuator housing unit
(Ref.#3) and secure with two pins and snap rings provided
with the actuator. Secure the actuator-housing unit to the
front of the tongue using three-(3) ½” X 4” hex bolts and
½” flange lock nuts. Using a ½” X 5” hex bolt on lower
right mounting hole on tongue, secure the safety chain.
Place a ½” flat washer on ½” X 5” hex bolt followed by one
safety chain and insert into actuator housing unit and
tongue. Place the second safety chain on the bolt followed
by a ½” flat washer and ½” flange lock nut. Tighten.
Brakes:
Refer to the brake manual for service and maintenance.
1 61214 BRAKELINE ASSY 88IN ......................... 1
2 62091-- TONGUE 3X3X60 ..................................... 1
3 65595-- OUTER HOUSING - UFP ACTUATOR ... 1
4 0110114 HH 1/2-13 X 4 CS GR5 ............................ 3
5 0110120 HH 1/2-13 X 5 CS GR5 ............................ 1
6 0810925 SCREW SELFDRILL HWH #10-16 X 3/4 4
7 1440102 FLANGE LOCKNUT SMALL 1/2-13 ......... 4
8 2220272 CHAIN 8/0 MACH CHAIN 37" W/837 ...... 2
9 3510030 GROMMET 7/8IN MOLDED ................... 1
10 3820060 ACTUATOR INNER .................................. 1
11 5110127 REFLECTOR ANDERSON AMBER ........ 2
12 5110318 9' TONGUE HARNESS ............................ 1
13 5110394 DO RAY JUMPER WIRE 24 IN ................ 1
14 5110456 LIGHT AMBER SIDE MARKER 36IN WI . 2
15 7010168 CAP PLASTIC OUTER MEMBER 2” DI .. 1
REF# PART# DESCRIPTION QTY