Epson PRO 4800 - Manual (Page 85)

4-85
Printing with Epson Drivers for Windows | 85
Choosing Cut Sheet Paper Options
1. On the Properties window, click the Paper tab. You see this window:
2. Select the paper source you’re using ( Paper Tray , Roll Paper , Roll
Paper (Banner) , or Manual Feed ) from the Paper Source list.
For more information about printing on roll paper, see page 86.
3. If you want to print to the edges of the page, click Borderless . Note
that borderless printing applies only to the left and right sides of the
page on cut sheets; margins are required at the top and bottom of the
page. For full-bleed borderless printing, use roll paper, as described on
page 87.
Choose Auto Expand or Retain Size :
• Auto Expand enlarges your image (up to 3%) to fit the size of the
paper.
• Retain Size prints your image at the size you specify in your
application. You need to size it slightly wider than the paper width if
you want to print without borders.
4. Select the Paper Size loaded in the printer.
sp4800Guide.book Page 85 Tuesday, March 7, 2006 3:49 PM