Epson PRO 4800 - Manual (Page 21)

1-21
Setting Up the Printer | 21
5. Install the ink cartridges in the printer. Hold each cartridge with the
arrow pointing toward the printer, then insert it into its slot. Make sure
you insert each cartridge in the correct slot.
6. After installing all 8 cartridges, lower the ink levers. The printer begins
charging the ink delivery system and the Pause light flashes.
7. When ink lever messages appear on the LCD, follow the instructions to
raise or lower the ink levers.
8. When READY appears on the LCD display, charging is complete. Press
the Pause button as indicated and close the ink compartment covers.
Caution: Charging takes
about 8 minutes. Never
turn off the printer,
release the paper lever, or
open the cover while the
Pause light is flashing, or
you may damage the
printer.
sp4800Guide.book Page 21 Tuesday, March 7, 2006 3:49 PM