Epson PRO 4800 - Manual (Page 71)

3-71
Printing with Epson Drivers for Macintosh | 71
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
• Paper Suction lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such as CAD drafting
paper or backlight film.
• Cut Method decreases the cutting blade pressure for thinner media,
or adjusts the speed for thick media. You may need to experiment to
determine the best setting for your paper.
• Platen Gap lets you fine-tune the setting for various paper
thicknesses.
• Eject Roller Type lets you define the eject roller for printing on
non-Epson media. You may need to experiment to determine the
best setting for your paper.
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper
options under the size setting, as described on page 62. In addition, you need
to check these settings for various cutting options.
1. Select Roll Paper Option from the pop-up menu shown below. You see
this screen:
sp4800Guide.book Page 71 Tuesday, March 7, 2006 3:49 PM