Epson PRO 4800 - Manual (Page 116)

5-116
116 | Maintaining and Transporting the Printer
Updating the Printer Driver Information
After the replacement operation, update the driver information using the
steps below.
• Mac OS X
Open the Epson Printer Utility in your Applications folder. Select
Stylus Pro 4800 , and click OK . Click the EPSON StatusMonitor
button and make sure the Matte Black cartridge option is shown. If not,
click
Update .
• Windows
Click the Main tab and make sure that the correct ink cartridge is
displayed. If not, set the information manually by clicking the Utility
tab and then the Printer and Option Information button.
Performing Additional Maintenance Tasks
In addition to running a power cleaning cycle and replacing the cutter blade,
you can use the Maintenance menu to set the printer’s date and time. You
can also use the maintenance mode to change printer defaults and run
special procedures.
Changing the Date and Time
Follow these steps to set the date and time:
1. Press the Menu button.
2. Press the button until you see MAINTENANCE , then press Menu
again.
3. Press the button until you see CLOCK SETTINGS , then press Menu
.
4. Use the or buttons to set each item in the date and time, displayed
in the following format: MM/DD/YY HH:MM .
sp4800Guide.book Page 116 Tuesday, March 7, 2006 3:49 PM