Winch guide, Winch operation – Polaris 2016 RZR 900 User Manual
Page 78
76
WINCH GUIDE
Winch Operation
14. The winch motor may become hot during winch use. If you winch
for more than 45 seconds, or if the winch stalls during operation,
stop winching and permit the winch to cool down for 10 minutes
before using it again.
15. After winching is complete, especially if winching at an angle, it
may be necessary to re-distribute the winch cable across the winch
drum. You will need an assistant to perform this task.
A.
Release the clutch on the winch.
B.
Feed out the winch cable that is unevenly bunched up in one area.
C.
Re-engage the winch clutch.
D.
Have an assistant pull the winch cable tightly with about 100 lbs. (45
kg) of tension using the hook strap.
E.
Slowly winch the cable in while your assistant moves the end of the
winch cable back and forth horizontally to evenly distribute the winch
cable on the drum.
F.
Doing this reduces the chances of the winch cable “wedging” itself
between lower layers of winch cable.
- 2016 RZR 900 EPS Trail 2016 RZR 900 XC Edition 2016 RZR S 900 2016 RZR S 900 EPS 2016 RZR 4 900 EPS 2016 RZR S 1000 EPS 2014 RZR 900 2014 RZR 4 900 2015 RZR XP 1000 2015 RZR XP 4 1000 2015 RZR 900 2015 RZR 900 EPS Trail 2015 RZR 900 XC Edition 2015 RZR S 900 2015 RZR S 900 EPS 2015 RZR 4 900 EPS 2016 RZR XP Turbo 2015 RZR XP 1000 EPS High Lifter Edition 2016 RZR XP 1000 EPS High Lifter Edition 2014 RZR 800 2014 RZR S 800 2014 RZR 4 800 2016 RZR 570 2016 RZR 570 EPS 2013 RZR 570 2011 RZR 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2014 RZR XP 1000 2014 RZR XP 4 1000 2016 RZR XP 1000 2016 RZR XP 4 1000 2014 RZR 570 2015 RZR 570 2015 RZR 570 EPS