Features and controls, Seat belts – Polaris 2016 RZR 900 User Manual
Page 36
34
FEATURES AND CONTROLS
Seat Belts
Seat Belt Inspection
Inspect all seat belts for proper operation before each use of the vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it's
securely latched.
2. Push the red release latch in the middle of the buckle to make sure it
releases freely.
3. Pull each seat belt
completely out and inspect
the full length for any
damage, including cuts,
wear, fraying or stiffness.
If any damage is found, or
if the seat belt does not
operate properly, have the
seat belt system checked
and/or replaced by an
authorized POLARIS
dealer.
4. To clean dirt or debris from the seat belts, sponge the straps with
mild soap and water. Do not use bleach, dye or household
detergents. Rinse the entire length of the belt webbing. Use a garden
hose to flush out the retractor and latch housings regularly.
Retractor
Housing
Latch Housings
- 2016 RZR 900 EPS Trail 2016 RZR 900 XC Edition 2016 RZR S 900 2016 RZR S 900 EPS 2016 RZR 4 900 EPS 2016 RZR S 1000 EPS 2014 RZR 900 2014 RZR 4 900 2015 RZR XP 1000 2015 RZR XP 4 1000 2015 RZR 900 2015 RZR 900 EPS Trail 2015 RZR 900 XC Edition 2015 RZR S 900 2015 RZR S 900 EPS 2015 RZR 4 900 EPS 2016 RZR XP Turbo 2015 RZR XP 1000 EPS High Lifter Edition 2016 RZR XP 1000 EPS High Lifter Edition 2014 RZR 800 2014 RZR S 800 2014 RZR 4 800 2016 RZR 570 2016 RZR 570 EPS 2013 RZR 570 2011 RZR 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2014 RZR XP 1000 2014 RZR XP 4 1000 2016 RZR XP 1000 2016 RZR XP 4 1000 2014 RZR 570 2015 RZR 570 2015 RZR 570 EPS