Maintenance, Tires – Polaris 2016 RZR 900 User Manual
Page 120
118
MAINTENANCE
Tires
Wheel Removal
1. Position the vehicle on a level surface.
2. Place the transmission in PARK. Stop the engine.
3. Loosen the wheel nuts slightly.
4. Elevate the side of the vehicle by placing a suitable stand under the
frame.
5. Remove the wheel lug nuts. Remove the wheel.
Wheel Installation
1. Place the transmission
in PARK.
2. Place the wheel in the
correct position on the
wheel hub. Be sure the
valve stem is toward the
outside and rotation
arrows on the tire point
toward forward
rotation.
WARNING! Improperly
installed wheels can adversely
affect tire wear and vehicle
handling, which can result in
serious injury or death. Always
ensure that all nuts are torqued
to specification. Do not service
axle nuts that have a cotter pin
installed. Your POLARIS dealer
can assist.
3. Attach the wheel nuts
and washers and finger
tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification. See page 117.
Valve Stem
Right Rear Wheel
(type varies by model)
- 2016 RZR 900 EPS Trail 2016 RZR 900 XC Edition 2016 RZR S 900 2016 RZR S 900 EPS 2016 RZR 4 900 EPS 2016 RZR S 1000 EPS 2014 RZR 900 2014 RZR 4 900 2015 RZR XP 1000 2015 RZR XP 4 1000 2015 RZR 900 2015 RZR 900 EPS Trail 2015 RZR 900 XC Edition 2015 RZR S 900 2015 RZR S 900 EPS 2015 RZR 4 900 EPS 2016 RZR XP Turbo 2015 RZR XP 1000 EPS High Lifter Edition 2016 RZR XP 1000 EPS High Lifter Edition 2014 RZR 800 2014 RZR S 800 2014 RZR 4 800 2016 RZR 570 2016 RZR 570 EPS 2013 RZR 570 2011 RZR 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2014 RZR XP 1000 2014 RZR XP 4 1000 2016 RZR XP 1000 2016 RZR XP 4 1000 2014 RZR 570 2015 RZR 570 2015 RZR 570 EPS