Maintenance, Battery – Polaris 2016 RZR 900 User Manual
Page 125
123
MAINTENANCE
Battery
Improperly connecting or disconnecting battery cables can result in an explosion
and cause serious injury or death. When removing the battery, always
disconnect the negative (black) cable first. When reinstalling the battery, always
connect the negative (black) cable last.
Your vehicle has an automotive-type sealed battery, which requires little
maintenance. Always keep battery terminals and connections free of
corrosion. If cleaning is necessary, remove the corrosion with a stiff
wire brush. Wash with a solution of one tablespoon baking soda and one
cup water. Rinse well with tap water and dry off with clean shop towels.
Coat the terminals with dielectric grease or petroleum jelly.
Battery Removal
1. Remove the driver’s seat (RZR/RZR S) or the left rear passenger
seat (RZR 4). See page 28.
2. Disconnect the black (negative) battery cable first.
3. Disconnect the red (positive) battery cable last.
4. Remove the battery hold-down strap.
5. Lift the battery out of the vehicle.
WARNING
- 2016 RZR 900 EPS Trail 2016 RZR 900 XC Edition 2016 RZR S 900 2016 RZR S 900 EPS 2016 RZR 4 900 EPS 2016 RZR S 1000 EPS 2014 RZR 900 2014 RZR 4 900 2015 RZR XP 1000 2015 RZR XP 4 1000 2015 RZR 900 2015 RZR 900 EPS Trail 2015 RZR 900 XC Edition 2015 RZR S 900 2015 RZR S 900 EPS 2015 RZR 4 900 EPS 2016 RZR XP Turbo 2015 RZR XP 1000 EPS High Lifter Edition 2016 RZR XP 1000 EPS High Lifter Edition 2014 RZR 800 2014 RZR S 800 2014 RZR 4 800 2016 RZR 570 2016 RZR 570 EPS 2013 RZR 570 2011 RZR 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2014 RZR XP 1000 2014 RZR XP 4 1000 2016 RZR XP 1000 2016 RZR XP 4 1000 2014 RZR 570 2015 RZR 570 2015 RZR 570 EPS