Maintenance, Engine oil – Polaris 2011 RZR User Manual
Page 82
78
MAINTENANCE
Engine Oil
Oil and Filter Change
Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart beginning on page 69. Always change the oil filter
whenever changing oil.
The engine drain plug is located on
the bottom of the crankcase.
1. Position the vehicle on a level
surface. Place the transmission
in PARK. Apply the brakes.
2. Start the engine. Allow it to idle
for two to three minutes. Stop
the engine.
3. Clean the area around the drain
plug.
CAUTION! Hot oil can cause burns to
skin. Do not allow hot oil to contact skin.
4. Place a drain pan beneath engine
crankcase and remove the drain plug.
5. Allow the oil to drain completely.
6. Reinstall the sealing washer on the drain plug.
Tip: The sealing surfaces on drain plug and crankcase should be clean and free
of burrs, nicks or scratches.
7. Reinstall the drain plug. Torque to 16 ft. lbs. (22 Nm).
Drain Plug
- 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2013 RZR 570 2016 RZR 570 2016 RZR 570 EPS