Maintenance, Brakes, Steering wheel inspection – Polaris 2011 RZR User Manual
Page 105
101
MAINTENANCE
Brakes
Brake Inspection
1. Check the brake system for
fluid leaks.
2. Check the brake pedal for
excessive travel or a spongy
feel.
3. Check the friction pads for
wear, damage and looseness.
4. Inspect the brake pad wear
surface for excessive wear.
5. Change pads when worn to
3/64" (1 mm).
Steering Wheel Inspection
Check the steering wheel for specified freeplay and smooth operation at
the intervals outlined in the Periodic Maintenance Chart beginning on
page 69.
1. Position the vehicle on level ground.
2. Lightly turn the steering wheel left and right.
3. There should be 0.8"-1.0" (20-25 mm) of freeplay.
4. If there is excessive freeplay or strange noises, or the steering feels
rough or “catchy,” have the steering system inspected by an autho-
rized POLARIS dealer.
3/64" (1mm)
- 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2013 RZR 570 2016 RZR 570 2016 RZR 570 EPS