Polaris 2011 RZR - Manual (Page 110)

106
MAINTENANCE
Tires
Wheel Removal
1. Position the vehicle on a level surface.
2. Place the transmission in PARK. Stop the engine.
3. Loosen the wheel nuts slightly.
4. Elevate the side of the vehicle by placing a suitable stand under the
frame.
5. Remove the wheel nuts and washers. Remove the wheel.
Wheel Installation
1. Place the transmission
in PARK.
2. Place the wheel in the
correct position on the
wheel hub. Be sure the
valve stem is toward the
outside and rotation
arrows on the tire point
toward forward rota-
tion.
WARNING! Improperly
installed wheels can adversely
affect tire wear and vehicle
handling, which can result in
serious injury or death. Always
ensure that all nuts are torqued
to specification. Do not service
axle nuts that have a cotter pin
installed. See your POLARIS dealer.
3. Attach the wheel nuts and washers and finger tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification. See page 105.