Rear service panel, Features and controls, Seats – Polaris 2011 RZR User Manual
Page 35
![background image](https://www.manualsdir.com/files/815172/content/doc035.png)
31
FEATURES AND CONTROLS
Rear Service Panel
The rear service panel is located behind the seats on the frame of the
vehicle. Remove the seats to access the service panel. Remove the ser-
vice panel to access serviceable engine components and clutches.
Seats
Before operating the vehicle, always push down on all seat backs to
ensure the latches are secure.
Seat Adjustments
Loosen (do not remove) the four screws located on the seat bottom.
Slide the seat forward or rearward to the desired position. Tighten the
screws to 4 ft. lbs. (5.4 Nm). Do not overtighten.
Seat Removal
1. Pull up on the seat latch
lever located under the rear
edge of the seat.
2. Tilt the seat forward.
3. Lift the seat upward to
remove it from the vehicle.
4. Reverse this procedure to
reinstall the seat. Make
sure the seat tabs at the
front edge of the seat slide
under the seat retainer bar.
5. Press down firmly at the
rear of the seat to engage
the rear latch.
Front Seat
Retainer
Seat
Latch
- 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2013 RZR 570 2016 RZR 570 2016 RZR 570 EPS