Driving through water, Operation – Polaris 2011 RZR User Manual
Page 66
![background image](https://www.manualsdir.com/files/815172/content/doc066.png)
62
OPERATION
Driving Through Water
Your vehicle can operate through
water with a maximum
recommended depth equal to
floor level. Follow these
precautions when operating
through water:
1. Determine water depth and
current before entering
water.
2. Choose a crossing where the
water level is lowest and
where both banks have grad-
ual inclines. Never operate
in water that exceeds the
maximum recommended depth.
WARNING! The large tires on your vehicle may cause the vehicle to float in
deep or fast-flowing water, which could result in loss of traction, loss of control,
overturn or accident.
3. Wet brakes may have reduced stopping ability. After leaving water,
test the brakes. Apply them lightly several times while driving
slowly. The friction will help dry out the pads.
NOTICE: Major engine damage can result if the vehicle is not thoroughly
inspected after operation in water. Perform the services outlined in
the maintenance chart. See page 69. Give special attention to engine
oil, transmission oil, demand drive fluid, rear gearcase oil, and all
grease fittings.
If your vehicle becomes immersed or is operated in water that
exceeds the floor level, take it to your dealer for service before
starting the engine. If it's impossible to bring the vehicle to your
dealer before starting the engine, perform the service outlined on
page 109, and take the vehicle to your dealer at the first opportunity.
Floor Level
- 2011 RZR S 2011 RZR 4 2009 Ranger RZR S 2010 RZR 2010 RZR EPS 2009 Ranger RZR 170 2012 ATV RZR 170 2016 ATV RZR 170 2013 RZR 170 2010 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 4 2015 RZR 170 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2013 RZR 570 2016 RZR 570 2016 RZR 570 EPS