Elation Professional 575E - Manual (Page 26)

Design Spot 575E™
©Elation Professional® 26
Design Spot 575E™
been running since it was last struck. This counter is automatically reset after every
power-on.
Clear lamp time
This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at
every lamp replacement. This procedure tracks the lamp running time so the lamp
can be replaced at the end of it’s recommended duty cycle.
• Select “Clear lamp time” in the system menu.
• The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.
• Press enter to confirm.
• Press the Mode/Esc-button to return to the main menu.
2. Temp. Info.
Base Temp – This function will display the base temperature of the fixture.
Inside head Temp – This function will display the head temperature of the fixture.
3. Software version
This function will display the current operating software version of the fixture.
• Select “Software Version” in the system menu.
• Press enter to confirm.
• The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”,
“V-2.6”.
• Use the UP and DOWN buttons to toggle through the software version of
different IC’s.
• Press the Mode/Esc-button to return to the main menu.
LAMP CONTROL:
1. Lamp on/off
With this function you can switch the lamp on or off via the Control Board.
• Select "Lamp on/off" by turning the LCD controls.