Polaris 2016 600 Rush PRO-S - Manual (Page 75)

73
THE PERFECT FIT
Traction Products
Studs
NOTICE: Failure to heed the following recommendations will result in tunnel or
track damage and a voided warranty.
The track is not warranted by POLARIS if studs have been installed.
Track warranties are also void if track damage or failure results from the
use of any non-POLARIS traction products. Use only POLARIS-
approved traction products on your snowmobile. See your dealer for
more information about installing studs and/or carbides.
NOTICE: Use of studs longer than the recommended length on snowmobiles
equipped with center coolers will result in center cooler damage or
damage to the tunnel.
The AXYS chassis features built-in tunnel protection which can accept
the POLARIS Signature Series 1.325" (3.4 cm) stud.
• POLARIS does not recommend the use of studs longer than the
POLARIS Signature Series 1.325" (3.4 cm) stud.
• POLARIS does not recommend using the 1.45" (3.7 cm) stud.
• POLARIS does not recommend studding the 1.75" (4.5 cm) track.
Maximum Penetration
POLARIS
Studs Stud Length
1.25-Inch
(3.2 cm)
Track
1.352-Inch
(3.4 cm)
Cobra Track
Overall
Installed
Height
Recommended
for AXYS models
in. cm in. cm in. cm in. cm
Signature
Series 1.325 3.4 .375 .95 .27 .7 1.58 4.0 YES
Signature
Series 1.45 3.7 - - - - 1.7 4.3 NO
Penetration Range
1/4-3/8 inch (6-9 mm)
Stud
Size
Track Lug
Height
Track Belt
Thickness