Polaris 2016 600 Rush PRO-S - Manual (Page 144)

142
MAINTENANCE
Battery (if equipped)
Battery Installation
Using a new battery that has not been fully charged can damage the
battery and result in a shorter life. It can also hinder vehicle
performance. Follow the battery charging instructions on page 144
before installing the battery.
1. Place the fully charged battery in the battery bracket.
2. Place the battery shield on the battery bracket. Install the screw to
secure the shield.
Torque: 7 ft-lbs (10 Nm)
3. Install the battery hold-down strap.
4. Install the battery bracket assembly on the chassis using the existing
fasteners.
5. Tighten the nuts.
Torque: 7 ft-lbs (10 Nm)
6. Tighten the screw.
Torque: 22 ft-lbs (30 Nm)
7. Connect and tighten the red (positive) cable first.