Polaris 2016 600 Rush PRO-S - Manual (Page 69)

67
THE PERFECT FIT
Handlebar Adjustments
Riser Angle
Riser angle can be adjusted to suit rider preference. Factory settings are
shown below.
1. Loosen the four bolts on the bottom of the adjuster block. If
necessary, pry the blocks apart with a screwdriver.
2. Adjust the riser forward or rearward to the desired position.
3. Tighten the bolts to 14.8 ft-lbs (20 Nm).
PRO-S Models - 0° PRO-X Models - 11° Forward