Polaris 2016 600 Rush PRO-S - Manual (Page 148)

146
MAINTENANCE
Fall Tune-Up
For maximum performance, arrange for a fall service tune-up with your
POLARIS dealer. His experienced and trained service technician will
keep your snowmobile in peak operating condition.
Matte Clear Coat Cleaning (if equipped)
Matte finish products are prone to trapping dirt, oils and other
contaminants. POLARIS Industries recommends cleaning with warm
water and a mild dish detergent. Use a soft sponge to gently rub the
surface and rinse with clean warm water. For stubborn stains such as
grease or oil use a citrus based cleaner (3M Citrus Base Cleaner
recommended). Spray onto the area to be cleaned and rub with a soft
sponge. Allow to sit for a couple of minutes and wash away with clean
warm water. Repeat as necessary to clean the surface.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive
surface. These products will buff the matte surface of the finish result-
ing in a glossy finish. It is not recommended that you clean matte fin-
ishes with a pressure washer as this will further imbed contaminants
into the clear coat and possibly damage the labels.
Extended Storage
Off-season or extended storage of your snowmobile requires preventive
measures to aid against deterioration and to prolong the useful life of
many components. See page 149 for the part numbers of POLARIS
products.