Grass Valley DCR 4000 - Manual (Page 8)

v4.0
DCR 4000 User’s Guide | Installation 1-2
1.2 Specifications
General
Power requirements (battery supply
used) 14 Vdc
Power requirements (external supply
used) 14 Vdc, 4A
Note: when the Viper and Venom are powered from the
same power supply max. supplied current should be 8A.
Power consumption (typical) 23 W (standby), 26 W (playback), 28 W (record)
Operating temperature -10°C to +40°C (14°F to +104°F)
Note: below 0°C (32°F) allow the device 10 minutes of
warming up time before specifications are met.
Storage temperature -20°C to +60°C (-4°F to +140°F)
Weight (approx.) 2.3 kg (4.6 lbs.)
Dimensions 235 (L) x 90 (W) x 145 mm (H)
Video
S/N ratio (Y-signal) typical 58 dB TBC
Modulation depth 55%
Storage
Technology solid-state flash memory
Recorder/video format auto-sensing to follow output from camera (all Viper modes
are supported)
Quantization 10-bit
Recording time up to 15 min. (HDTV), up to 10 min. (FilmStream)
Connectors
Video output 26-pin multicore connector
Docking connector D-type 24 pin (7 coaxial, 23 regular)
HDSDI output 2x BNC, SMPTE 292M, 0.8 Vpp, 1.5Gb/s, 75
Ω
Dual HDSDI output 2x BNC, SMPTE 292M, 0.8 Vpp, 1.5Gb/s, 75
Ω
Audio monitor output 3.5mm phono jack, line level
DC input (docking plate) XLR 4-pin male, 14 Vdc (battery) or 15 Vdc (external)
DC input (recorder) XLR 4-pin male, 14 Vdc (battery) or 15 Vdc (external)
Reference input BNC, on docking adapter
Time code input Standard 5 pin Lemo timecode connector (suits Lockit box or
similar) on docking adapter.
Bluetooth interface provides access to metadata, transport control, clip selection
and playback functions.