Grass Valley DCR 4000 - Manual (Page 11)

v4.0
DCR 4000 User’s Guide | Installation 1-5
1.4.3 LED Indicators
Bluetooth (blue) On Bluetooth connection is present.
Off Bluetooth connection is NOT present.
Power (green) On The Venom is powered and switched on.
Off The Venom is not powered or switched off.
Blinking Operating temperature is too high (>70°C) or the voltage is
too low (<10.0V)
Ready (green) On The system is ready to record a clip.
Off No recording time left. Recording is not possible.
Blinking Remaining recording time is less than 30 sec.
Play (green) On The currently selected clip is played back.
The PLAY ON status is sent out as TALLY OUT to the field
recorder.
Off Playback has stopped
Record (red) On The Venom is recording a clip.
The RECORD ON status is sent out as TALLY CAM to the
camera where it is used for displaying in the viewfinder and
for switching on the Tally light.
Off When the system runs out of memory the recording stops
and the Venom returns to the idle state.
Blinking The Venom is recording a clip but remaining recording time is
less than 30 sec.