4 playback from venom – Grass Valley DCR 4000 User Manual

Page 23

v4.0

DCR 4000 User’s Guide | Using Venom with Viper

2-5

☞

Note

If metadata is to be recorded for the new take, it must be sent to the FlashPak before the take
is recorded. See section about metadata for more information.

During recording the display shows Date and Time (starting) , the duration of this Take,
available record time remaining for the current format and the time code (External or Internal).
Record Light on Venom will be lit and the Tally lights on the camera will be active.

When recording is stopped, the system is immediately available to start the next Take.

☞

Note

In the event of power loss during a recording, either by removal of the power source or by
battery power being below the 9.5V threshold, the Take being recorded will be lost. All
previously completed Takes will be safeguarded and the FlashPak will recover when power is
restored.

2.4

Playback from Venom

Recorded material can be played back from Venom immediately after recording has stopped,
by pressing PLAY.

Output is by Dual Link HDSDI, or single HDSDI according to the format, using the two BNC
connectors on the Venom and connecting to a suitable monitor. This output will be in the same
format as the recorded signal.

Audio output is from the stereo jack plug on the Venom.

RECORD

POWER

LIGHT

ESC

DOWN

PLAY

READY

SEL

PLAY

STOP

REC

TAKE 001 01:21 11:16

1080i50/psf25 sL

26.04.05 11:13:04

TC EXT 00:22:35:00