Grass Valley DCR 4000 - Manual (Page 20)

v4.0
DCR 4000 User’s Guide | Using Venom with Viper 2-2
2.1.1 Idle Screen without source signal
The remaining recording capacity is shown as a percentage of total storage.
2.1.2 Idle Screen with source signal
When a source signal is present, the display shows the format of the signal. Additionally an
indication of which signal is in use is given by ‘dL’ for a Dual Link signal and ‘sL’ indication for a
Single Link signal. For more information see ‘Formats Recorded on Venom’.
The presence of a timecode signal at the LTC input is indicated as follows:
The remaining recording capacity is shown as the time available for the current input signal
format.
On the left of the screen the cursor (>) shows the current line. Up and down arrows on the
right hand side show when further menu options can be displayed by pressing [UP] or
[DOWN].
RECORD RECORD
POWER POWER
LIGHT LIGHT
ESC ESC UP UP
DOWN DOWN
PLAY PLAY
READY READY
SEL SEL
PLAY PLAY STOP STOP REC REC
REMAINING TIME 35%
NO SOURCE/SYNC******
> TAKE 009 03:28
NO METADATA ↓
indication description
... no external timecode signal present
LTC timecode signal present
JAM timecode signal was present but is now disconnected
RECORD RECORD
POWER POWER
LIGHT LIGHT
ESC ESC UP UP
DOWN DOWN
PLAY PLAY
READY READY
SEL SEL
PLAY PLAY STOP STOP REC REC
REMAINING TIME 02:12
IN:1080psf24 dL LTC
> TAKE 009 03:23
NO METADATA ↓