Grass Valley PDR 100 9GB Media Drive Upgrade User Manual
Page 39
Installing the New Drive Tray and Drives
PDR 100 9GB Disk Drive Upgrade
29
3. Connect the power cable from the fan tray to J2 on the Fan board. See
4. Connect the fan power cable to the pins at J6 and J7 on the Fan board. See
5. Reconnect the cable from J1 on the Fan board to the distribution board. See
6. Dress the SCSI cables, and the fan and hard disk drive supply cables through
the channel at the right of the fan tray. Use the supplied ties where appropriate.
7. Reinstall the power supply shield.
8. Slide the 9 GB drives into the drive tray. See Figure 22.
NOTE: Be sure to correctly orient the 9 GB drives before inserting
them into the tray. Incorrectly oriented drives will not connect to the
SCSI connectors in the bottom of the tray.
See also other documents in the category Grass Valley Equipment:
- LDK 5302 (24 pages)
- SFP Optical Converters (18 pages)
- 2000GEN (22 pages)
- 2011RDA (28 pages)
- 2010RDA-16 (28 pages)
- 2000NET v3.2.2 (72 pages)
- 2000NET v3.1 (68 pages)
- 2020DAC D-To-A (30 pages)
- 2000NET v4.0.0 (92 pages)
- 2020ADC A-To-D (32 pages)
- 2030RDA (36 pages)
- 2031RDA-SM (38 pages)
- 2041EDA (20 pages)
- 2040RDA (24 pages)
- 2041RDA (24 pages)
- 2042EDA (26 pages)
- 2090MDC (30 pages)
- 2040RDA-FR (52 pages)
- LDK 4021 (22 pages)
- 3DX-3901 (38 pages)
- LDK 4420 (82 pages)
- LDK 5307 (40 pages)
- Maestro Master Control Installation v.1.5.1 (455 pages)
- Maestro Master Control Installation v.1.5.1 (428 pages)
- 7600REF Installation (16 pages)
- 7600REF (84 pages)
- 8900FSS (18 pages)
- 8900GEN-SM (50 pages)
- 8900NET v.4.3.0 (108 pages)
- Safety Summary (17 pages)
- 8900NET v.4.0.0 (94 pages)
- 8906 (34 pages)
- 8911 (16 pages)
- 8900NET v.3.2.2 (78 pages)
- 8914 (18 pages)
- 8912RDA-D (20 pages)
- 8916 (26 pages)
- 8910ADA-SR (58 pages)
- 8920ADC v.2.0 (28 pages)
- 8920ADC v.2.0.1A (40 pages)
- 8920DAC (28 pages)
- 8920DMX (30 pages)
- 8920ADT (36 pages)
- 8920MUX (50 pages)
- 8921ADT (58 pages)