Grass Valley PDR 100 9GB Media Drive Upgrade - Manual (Page 29)

Disassembling the PDR100
PDR 100 9GB Disk Drive Upgrade 19
Removing the Front Panel
You must remove the front panel to remove the backing plate, which in turn
must be removed to disconnect the LED cables. You must replace the LED
cables if they don’t have EMI suppression beads.To remove the front panel:
1. Being careful to support the front panel, use the Torx tool with the T20 tip to
remove the four screws that mount the handles and front panel to the chassis
(
➊
in Figure 13).
Figure 13. Removing the front panel and backing plate
9686-2