Grass Valley PDR 100 9GB Media Drive Upgrade - Manual (Page 25)

Disassembling the PDR100
PDR 100 9GB Disk Drive Upgrade 15
Removing the Fan Tray
The fan tray must be removed to remove the old disk drive tray. To remove the
fan tray:
1. Disconnect the cables from J2, J6, and J7 on the fan board. See Figure 9.
(Cables to J1, J3, J4, and J5 need not be disconnected.)
Figure 9. Disconnecting the fan board cables
2. At the distribution board, disconnect the power cable running from the fan
board to the distribution board as shown in Figure 9.
3. Use the Torx tool with the T15 tip to remove the four screws mounting the fan
tray to the chassis. See Figure 10.
9686-25
Disconnect
cable
Disconnect
cables
J1
J2
J3
J4
J5
J6
J7