Grass Valley PDR 100 9GB Media Drive Upgrade - Manual (Page 11)

PDR 100 9GB Disk Drive Upgrade 1
PDR100 9GB Disk Drive Upgrade
Introduction
This upgrade to the PDR100 replaces the 4.5GB hard disks with 9GB hard
disks, thus doubling the storage capacity of the PDR100. This installation
manual includes instructions for:
1. Removing the 4.5GB drives and the disk drive tray.
2. Installing the new disk drive tray and 9GB disk drives.
3. Rebuilding the Disk File System.
Upgrading the PDR100 with 9GB drives involves extensive disassembly of
your Profile System. The procedures in this manual move step-by-step through
the disassembly and re-assembly processes to aid you in successfully installing
the upgrade kit. Tektronix recommends that you remove the PDR100 from the
rack and place on a suitable work surface. This allows easier access to the
Profile chassis.
Related Documents
The following lists related documents:
• PDR100 Installation Manual
• PDR100 Service Manual
• Profile Family User Manual
System Requirements
The Profile software installed in the PDR100 must be version 2.2 or higher. To
check the software version installed in your PDR 100, use the
Help | About
command like the one shown for the VdrPanel in Figure 1. The software version
is listed in the Product Version field in the displayed window.
.
Figure 1. Checking the Software Version