Grass Valley PDR 100 9GB Media Drive Upgrade - Manual (Page 23)

Disassembling the PDR100
PDR 100 9GB Disk Drive Upgrade 13
Removing the Power Supply Shield
You must remove the power supply shield to gain access to the disk drive power
cables connected to the power supply. To remove the power supply shield:
1. Use the Torx tool with the T10 tip to remove the screw which secures the shield
to the chassis (
➊
in Figure 7).
Figure 7. Removing the power supply shield
2. Carefully move the shield back and to the left until it can be lifted out of the
chassis (
➋
in Figure 7).
9686-3
1
2