Grass Valley NetConfig Network Configuration Application v.2.0.12 - Manual (Page 36)

NetConfig — Instruction Manual 36
Using NetConfig
6. Click the Load or Load All button to install the new software in the devices
you’ve selected. A progress pop-up will display the software update
progress.
Figure 36. Software Update Progress
When the software update is complete without error, the message
shown in
Figure 37 will appear.
Figure 37. Software Update Complete Message
7. Wait long enough for the devices to reboot, then click the Refresh button
to confirm that your updates are in place.
8. Click the Close button to exit the Update Devices window.