Grass Valley NetConfig Network Configuration Application v.2.0.12 User Manual
Page 32
NetConfig — Instruction Manual
32
Using NetConfig
•
You can also click on a column heading to sort the list by that
column’s data. Click on the heading again to sort the list in the
opposite direction.
•
Clicking the
Re-Discover
button at the bottom of the screen refreshes
the contents of the list box dialog.
3.
Select the device on the list you wish to change by double-clicking its
name, or highlight the device and select the
Edit
button to bring up the
Change IP Address dialog box (
Figure 30. Change IP Address Dialog Box
The edit boxes in this frame display the IP address, Subnet Mask,
Gateway, and Server 1 and 2 addresses corresponding to the item
selected in the list box.
Note
Selecting multiple devices allows you to change the data for these devices to
the same values in the selected fields. The last octet of each device’s IP
address is retained, however, to prevent duplicate IP addresses. This lets you,
for example, move several devices to a different subnetwork with one action.
4.
Checking the boxes on the left activates the edit box and allows you to
change the data.
5.
Click
OK
to enter the new values.