Grass Valley NetConfig Network Configuration Application v.2.0.12 - Manual (Page 18)

NetConfig — Instruction Manual 18
Using NetConfig
Note The illustration shows the toolbar set to Icon and Text mode. To change the
toolbar icon view, refer to
Tool Bar Views on page 39 .
Figure 12.
Discover
Button
View
Buttons
Initial NetConfig Main Screen, No Devices Present
The Discover button is used to detect devices on the network, and the three
View buttons determine how the devices are shown on the screen.
When devices are detected and a view is selected, the left side of the screen
displays the logical tree of the devices on the network the PC is connected
to (via the Default Gateway assigned to the PC).
The right portion of the screen is the web browser view. When you click a
device in the IP or Device views or a Facility view device with an
embedded link, the home page for that device or the embedded link is dis-
played in the web browser view (
Figure 13 ).