Grass Valley NetConfig Network Configuration Application v.2.0.12 - Manual (Page 33)

NetConfig — Instruction Manual 33
Using NetConfig
Note This does not apply the changes to the selected device(s) yet.
If you attempt to assign an IP Address that is already assigned to
another device on the network, a warning message (
Figure 31 ) will be
displayed.
Figure 31. Duplicate IP Address Warning
6. If this is a valid IP address (not used by another device) a confirmation
screen will come up (
Figure 32 ).
Figure 32. IP Address Confirmation Screen
7. Click Apply Changes to send the modified/updated information to the
clients. This enacts the changes to the device(s).
• Clicking the Status Refresh button also discovers the changes, if any,
made (through the web page or otherwise) to the network parame-
ters of the devices listed and refreshes the list box as well as the Tree
View in the main NetConfig window.
• Clicking the Re-Discover button searches for new devices that have
come on-line.
• Clicking the Close button discards the changes made, if any (before
clicking on Apply Changes ) and exits from the dialog.