Grass Valley KAM-DEC-2AES v.4.0.3 - Manual (Page 7)

KAM-DEC-2AES Instruction Manual 7
KAM-DEC-2AES Kameleon
Series Module
Introduction
This manual provides installation, operation and configuration informa-
tion for the KAM-DEC-2AES Kameleon Series module.
The KAM-DEC-2AES modules provides broadcast quality NTSC/PAL to
serial digital video conversion supporting balanced or unbalanced
2 channel AES I/O.
This module features:
• NTSC/PAL video conversion to broadcast quality serial digital,
• Two 48 kHz AES digital audio input and output streams (balanced or
unbalanced),
• Audio and video delay, synchronization and processing amplifier,
• Powerful line-by-line VBI processing including user-configuration of
active video lines for carrying data,
• Built-in 4x4 audio router for mapping audio channels to specific AES
streams,
• Audio and video test generators,
• Hot swappable,
• 5 user-programmable E-MEM registers,
• Save/load module configuration files to a networked PC,
• SNMP monitoring capability,
• Web browser GUI (graphical user interface), and
• Support for Newton Control System and NetConfig Network Configu-
ration application.
Note KAM-DEC-2AES operation requires 2000NET Network Interface Module
hardware revision 01A1 or greater with software version 3.2.2 or greater.
Systems installed in the 2000T3N frame require the 2000FAN fan sled (refer
to
Figure 3 on page 11 ).