Grass Valley KAM-DEC-2AES v.4.0.3 - Manual (Page 26)

26 KAM-DEC-2AES Instruction Manual
KAM-DEC-2AES Links and Web Pages
Warning/Fault Summary
The warnings and faults shown below are reported in the summary section
of the Status web page (
Figure 11 on page 25 ). A Fault indicates a serious
condition that prohibits proper operation. A Warning indicates a condition
which may or may not adversely affect operating conditions, but should be
noted. Warnings may possibly be corrected by changing configuration, set-
tings or input signals.
Warnings
• WARNING - Rear Module is not connected
• WARNING - Wrong Rear Module (incompatible with Kameleon)
• WARNING - Wrong Rear Module (no communication)
• WARNING - Wrong Rear Module (unknown type, incompatible)
• WARNING - Video Input is 625 and reference is 525 lines
• WARNING - Video Input is 525 and reference is 625 lines
• WARNING - Video Input is 625 but configuration is 525 lines
• WARNING - Video Input is 525 but configuration is 625 lines
• WARNING - Video Input Signal not detected
• WARNING - Frame Reference is not present
• WARNING - Frame Reference is not locked to input
• WARNING - Frame Reference is not present
• WARNING - No Video output - GenLock selected but not present
• WARNING - 1 or more Audio Input signals not detected
• WARNING - 1 or more Audio Input signals have had AES stream errors
• Internal Error - Unknown submodule type
Faults
• FAULT - nnV power supply bad. (nn = variable: 24 V, 12.5 V, 5 V,
3.3 V, 1.5 V, -5 V, or -12.5 V)
• FAULT - A/D failed (A /D system measuring power supplies and bus
levels)
• FAULT - Xilinx 1 failure (main video processor)
• FAULT - Xilinx 2 failure (main audio processor)
• FAULT - MFM (Multi-function module) EEPROM checksum fails