Grass Valley KAM-DEC-2AES v.4.0.3 - Manual (Page 22)

22 KAM-DEC-2AES Instruction Manual
Initial Configuration Process Overview
Variables:
• Model and Description are read-only generated by the module.
• Frame Location is entered in 2000 Series Kameleon Frame configura-
tion.
• Slot number reports the module’s location in the frame.
• Last Recalled E-MEM reports the last E-MEM configuration recalled
from the module.
Initial Configuration Process Overview
To configure the Kameleon module proceed as follows:
1. Go to the I/O Config web page to setup and name inputs and outputs.
2. If not already connected, connect all input and output signals. Go to the
module
Status web page to verify component and signal presence and
condition.
3. Go to the Video Input Select web page to configure the video source and
output timing source.
4. Go to the Functional View web page to:
• Verify the module’s functional configuration is correct, and
• Begin with the Input block links to configure each function in turn.
Note Next, Functional View, and Back links are provided to help you navigate
through a logical configuration sequence.
5. Use E-MEM memory to store or recall configurations as necessary.