Grass Valley KAM-DEC-2AES v.4.0.3 - Manual (Page 34)

34 KAM-DEC-2AES Instruction Manual
KAM-DEC-2AES Links and Web Pages
VBI Decode for Composite Input
Use the VBI decode web page ( Figure 17 for 525, Figure 18 on page 35 for
625 line rate) to configure the VBI and Data Line decoding of the composite
input signal.
The currently detected line rate will be reported. Use the View Selection to
view the web page at the correct line rate with the
525 or 625 radio button.
On a line-by-line basis you can remove black level setup (in NTSC or
PAL-M video) and select one of the following three decoding options:
• Blank existing VBI and Data Line information,
• Select Notch Decoding of the composite signal, or
• Pass through decoded VBI and Data Lines (active video lines) informa-
tion as is.
Note The data lines not reserved for carrying data on the Video Input Select web
page will appear greyed out. See
Advanced VBI Configuration on page 38 .
Figure 17. VBI Decode Web Page – 525 Line Rate
Use
this
link