Grass Valley K2 TX/MAM User Manual v.2.4 - Manual (Page 51)

TX/MAM User Manual - document version: 2.4 – Page 51

Select a User group from the dropdown menu.

Channel name : specify a Channel name

Playout server ip: the IP-address of the K2 Edge playout node (main or backup) this Channel
will run on.

Server port: the playout server port, default 5020

Broadcast set: select the appropriate broadcast set:
Channel Broadcast set
Single HD/SD 1:broadcast0
Simulcast 1 of 2 (HD) 1:broadcast0
Simulcast 2 of 2 (SD) 1:broadcast0
Preview 2:broadcast1
Record 4:broadcast3
JIP 5:broadcast4

Opt out: not used

Timecode format: select the timecode format for this Channel

Is Simulcast: used for JIP only in a simulcast configuration
playout distri

Look ahead (in hours): look ahead time for the playout_distri process in hours

Error lookahead (in hours) : look ahead time for errors: main Events between current time
and current time plus error look ahead time are checked

Alarm threshold (in minutes) : not used
sequencer

Trigger delay (in frames) : trigger delay in frames for manual Events

Virtual channel : check to specify: no sequencer

Disable scenegraph preload : used for JIP, enable for JIP-channel