Grass Valley K2 Dyno Installation v.2.0 - Manual (Page 26)

About K2 Dyno software
This is the software components in the K2 Dyno Replay system:
• K2 Dyno Client software – This software runs on the K2 Dyno Controller.
When installing/upgrading K2 Dyno software you must consider versions and compatibility for all
components. If software is not yet installed on the device, find the first-time installation instructions
in this manual. If software is already installed on the device and needs to be upgraded, find upgrade
instructions in the release notes for the version of K2 Dyno software to which you are upgrading.
Uninstall K2 Dyno Server software on Summit
As of K2 Dyno software version 2.0, you no longer need K2 Dyno Database Server and K2 Dyno
Server software on the K2 Summit Production Client or K2 Solo Media Server.
On your Summit system, follow these steps:
1. Uninstall the K2 Dyno Database Server software.
2. Uninstall the K2 Dyno Server software.
Enable write filter
Prerequisite:
• K2 software must be installed on the K2 system.
1. If you have not already done so, log on to the K2 system with Windows administrator privileges.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Write Filter Utility .
FBWF Manager opens.
3. Under Filter Settings, set Filter to Enable .
4. Under Protected Volumes, set C: to Protected .
Do not modify other settings.
5. Click OK .
6. When prompted, restart the K2 system.
Configure K2 Summit/Solo channels
On the K2 Summit Production Client or K2 Solo Media Server, configure channels according to
your needs.
1. Log on with K2 administrator credentials.
26 K2 Dyno Controller Installation Manual 14June 2011
Installing and configuring software